EN Sole Flexing Tester is used to measure the flexing resistance of shoe soles under continuous movement. Whole Sole Flexing Test Machine Features 1. Test position can be made in Vertical or horizontal direction. 2. Safety Cover is equipped to protect the operator. 3. Shoe sole flexing tester with temperature control available; 4. Brand motor to ensure long service life. 5. Clamps are made of stainless steel to provide enough tenacity and sturdiness..The unique clamp design facilitates faster fixing of samples. 6. Workstations can accommodate 3pcs / 6pcs soles to be tested at the same time.。 Equipped with a quality motor offers strong power for flexing. 7. Digital-display counter supports preset the number of flexes before the test.。 The adjustable bending rate is available from 125cpm to 150cpm. 8. Supports operation interface in Chinese&English. Shoe Sole Flexing Resistance Test pinciple Shoe Sole Flexing Resistance test piece fastened to the clamps is incised by a cutting tool in the area directlyover the center roller when the specimen is in the maximum stretched state.Afterflexed for specific cycles at a specified speed through a 90-degree angle, the final cutlength on the surface of the specimen is measured using a measuring magnifier tocompare with the initial cut length before the test to get the cut growth for determiningthe flexing resistant performance of the test sample. How to Carry Out the Sole Flexing Test 1.Prepare the test sample and mark the point on it for later insertion of a cut. 2.Remove the heel from the outsole and clam the outsole according to the standard. Make sure the outsole would be fully flexed in the right position. 3.Pierce the test piece at the point above the mandrel using a cutting tool when the specimen is at maximum flex position,then measure theinitial length of the cut. 4.Actuate the bending tester to conduct the test for 30,000 cycles at a constant speed between 135 cycles /min and 150 cycles/min. 5.At completion of given cycles, measure the latest length of the cut again and minus the length of the cut before the test to get the cutgrowth. Notice for EN Sole Flexing Test Before the EN Sole Flexing Test, the outsole test sample should be test on outsole rigidity tester. Outsole which needs more than 30N to reach the angle of 45° is not suitable to flex on the whole sole flexing tester.

Walking is the most common exercise in people's daily life. During walking, due to different road conditions, shoes and other conditions, it is very likely to slip or even fall. When our feet are tilted, the body can automatically twist to ensure balance, but severe slippage may cause the body to become unbalanced or even fall. This is a test of the performance of the sole. The structure of the sole is quite complicated.Ccommon features of general sole material should have wear-resisting, water resistant, oil resistant, heat resistant, compression, impact resistance, good elasticity, easy for foot type, after finalize the design is not easy to distort, thermal insulation, easy to absorb moisture, etc., at the same time more to cooperate in the bottom, when walking in the foot brake function not slip and the various conditions such as easy to stop. Therefore, the test of the sole is a necessary testing item, GESTER summarizes the following sole testing instruments. 1.Sole Abrasion Resistance Tester GT-KA13 This tester is used to measure the abrasion resistance of finished shoe sole or molded sole(piece).It adopts rotating abrasion wheel vertically pressing on the specimen under a certain load by a certain speed and for a certain period of time in order to measure the length of abrasion track. 2. ASTM D1052 Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sole of rubber, PU, PVC, TPR foam and other materials. And inspect its degree of damage, cracking and reduced decline by continuously stretch and bending. 3. SATRA TM161 Sole Flexing Testing Machine GT-KB06 This tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length. 4. Shoe Sole & Upper Shoe Peeling Strength Tester GT-KC41B This Shoe Testing Machine To determine the strength of the bond between the sole and upper at the toe and heel area of the lasted margin of completed footwear. The method is mainly applicable to stuck-on or moulded-on constructions with an extended sole edge. If the customer does not know how to choose the testing instrument for the sole, he can consult GESTER, and we can recommend it for you according to your needs.

Universal tensile testing machine, as the name implies, is a testing equipment that can perform various tests on various materials. It is widely used in various industries, so what should be paid attention to when purchasing? 1. Test stroke space The stroke is about 600-1500mm, which is enough for general customers. The maximum stroke space of the GESTER Universal Tensile Strength Tester can reach 1500mm. If the customer has requirements for the stroke space,  can be customized. 2. Force Accuracy Accuracy includes force accuracy, velocity accuracy, deformation accuracy, and displacement accuracy. For general manufacturers, 1% accuracy is enough. The accuracy of the GESTER fabric strength testing machine can be up to plus or minus 0.5. 3. Main configuration Drive, lead screw drive and rack drive. Lead screw drive is expensive, used for high precision, high test repeatability; Rack drive, for low precision, low test repeatability. The lead screw plays a decisive role in the measurement of tensile force accuracy. There are ball screws, trapezoidal screws, and general screws. Among them, the ball screw has the highest accuracy, and its performance can only be exerted by the operation of the computer servo system. The accuracy of the general lead screw and trapezoidal lead screw is not so high. GESTER tensile test using universal testing machine adopts Servo motor drive, synchronous wheel and precision ball screw drive, which has high precision and high test repeatability. 4. Output results The output results of the test results can be arbitrarily set: maximum force value, elongation, tensile strength, fixed elongation, fixed elongation force value, yield strength, elastic modulus, maximum test force 8 items. GESTER tensile strength testing machine can test all eight. 5. Experimental projects Tensile machine is required to be multi-purpose, that is, equipped with different materials, can be used for tensile, compression, bending, tearing, shearing, peeling and other tests. GESTER Universal Testing Machine is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests 6. Standard configuration problems Intelligent three basic configuration: host, microcomputer, and printer, if the microcomputer function is strong can directly print. It can also be equipped with ordinary computers. With computers, sophisticated data analysis can be performed, such as data editing, local magnification, adjustable report forms, and group-style statistical analysis. GESTER tensile testing machine has this function. 7. Test speed Some equipment in the market is 10~500mm/min, and some are 0.001~500mm/min. The former generally uses ordinary speed control system, which has low cost and roughness affects accuracy; the latter uses servo system, which is expensive and high precision. Speed control range of GESTER computerized universal testing machine: 0.001-500mm/min or 0.001-1000mm/min (optional). 8. Tension range The di...

There are many examples of textile waterproofing in daily life, such as umbrellas, diving suits, etc. How are textile fabrics waterproofed? Commonly used fabric waterproof treatment is divided into water-repellent treatment and hydrostatic pressure-resistant treatment, moisture-permeable waterproof treatment. GESTER has a corresponding waterproof test instrument. 1. Water repellent treatment After the fabric is treated with water repellent, the surface tension changes and the fabric changes from hydrophilic to hydrophobic. The water drops on the fabric, just like dropping on the lotus leaf, can roll but not wet. Corresponding water repellent testing machine: Spray Rating Tester For Textile GT-C31 Spray Rating Tester can performs a shower test to determine the resistance of fabric to surface wetting by water.Spraying quantitative distilled water on the specimen (at a 45 degree angle and 150 mm below) with standard nozzle. Then contrast andevaluate the specimen surface with the standard cards. 2. Hydrostatic treatment The surface of the fabric is coated with a continuous film that is impermeable to water, blocking the voids in the fabric and hindering the passage of water droplets. This method is also called coating finishing. Corresponding Hydrostatic tsteng machine:Hydrostatic Head Tester For Textile GT-C26A Digital Hydrostatic Head Tester is used to testing the waterproof properties offabrics through waterproofing work such as canvas, coated fabrics, hood fabric,tarpaulin, rain-proof fabrics and geotextile. 3. Moisture permeable and waterproof treatment Clothing is usually finished with moisture permeability and waterproof, so that it has a certain waterproof performance without reducing the moisture permeability of the fabric, and it is comfortable to wear and not stuffy. Corresponding moisture permeable testing machine:Fabric Water-vapour Transmission Tester Fabric water vapour Permeability Tester to test the water vapour transmission of various fabric(moisture permeable fabric included) andnon-woven fabric such as bat wool, space cotton, sportswear fabric etc. Tips According to the use of the product and the expected effect to be achieved, choose the appropriate method to test the waterproof performance

How to test the pilling of fabrics？ The test methods of fabric pilling performance are mostly random tumbling pilling test method, box type pilling test method, Martindale pilling test method. GESTER is a manufacturer of textile testing equipment, which can provide testing equipment corresponding methods. Random tumbling pilling test method: Test instrument: random tumble pilling tester. Random Tumble Pilling Tester is used to determine the plling and fuzzing characteristics of textile fabrics. Precision high-speed impeller for agitating the test specimens against cork lining for a pre-determined time controlled by a timer and audible alarm. Compressed air is also injected into the chamber to assist in the tumbling action. Laboratory standard compressed air supply required. Standards: ASTM D3512 DIN 53867 JIS L 1076 Ici pilling box test method: Test instrument: ici piliing box tester ICI Pilling Box Tester is used to rapidly replicate pilling on fabrics in a fraction of the time due to normal wear. then determine surface pilling and snagging properties of both in woven and knitted fabrics. ICI Pilling Tester complies with IS012945-1, BS 5811 etc. ICI plling tester uses a universal drive system with 2 or 4 position, electronic digitalcounter, and sample mounting fixture. The machine accepts ICI Pilling boxes and ICI plling drums. Specimens are mounted on polyurethane tubes and tumbled randomly under defined conditions in a cork lined box. Pilling is assessedvisually after a defined period of tumbling. Ici Pilling Box Standards: GB/T4802.3, ISO 12945.1, BS5811, IWS TM152 Martindale pilling test method Test instrument: martindale tester The Martindale Abrasion and Pilling Tester is the standard method of determining the wear resistance of textiles or leather and the resistance to pilling. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters. Adaptable to test a wide range of applications including textiles, socks, leather, coated upholstery, carpets, wood and shirt collars. Four models are available, with 4, 6, 8 and 9 Abrading. Standards of martindale tester: Abrasion: GB/T 21196.2, GB/T 13775, ISO 12947, ASTM D4966, IWS TM 112, M& S P19, Next 18, SN 198529, TWC 112, JIS L1096 ( ISO17076-2 ball plate method ,optional) Pilling: GB/T 4802.2, ISO12945-2, ASTM D4970, IWS TM 196, M & S P17, Next TM26, SN 198525

What is the Footwear Fiber Board Flex Tester This tester is used for testing the fiberboards such as insole foreparts and stiffener that are flexed or deformed in wear to measure its quality and durability. Fibre Board Flex Tester is used to determine flex test for shoe insole fiberboard and applicable for common leather shoes and sneaker insole fiberboard, but not for toe cap, counter-heel, semi-back and special leather shoes and sneaker insole fiberboard. Configure Presetting digital counter with automatic stop function. Stable motor with low running noise. Six testing positions with six individual counters. Work This tester is used to test the flexing resistance of fiberboards of insole fore parts. the method of test is to flex the specimen at the angel of 180 degree ± 90degree at each side, reciprocally under a given load. When specimen fails, the flexing times would be the flexing index of the specimen. and this is a good reference for comparing and selecting the material of fiberboards. Fibreboard is flexed mechanically and repeatedly to 90°each side of the vertical at the rate of 60 cycles per minute until failure occurs. From the number of flexing cycles to failure, a flexing index is calculated to assess the flexing quality of the fibreboards used in footwear. Shoes Fiberboard Bending Testing machine is used for testing the fiberboards such as insole foreparts and stiffener that are flexed or deformed in wear to measure its quality. During test, the specimen is rotated through 180°(90°each side of vertical) back and forth under a certain load until it breaks. In the meantime, the number of flexes to failure of each specimen will be displayed on each individual counter.

Random Tumble Pilling Tester is an indispensable testing instrument for textile enterprises. In order to allow users to better use the random pilling tester, GESTER will explain to you what the random pilling testing machine is. Random Tumble Pilling Testing Equipment is used to determine the pilling and fuzzing characteristics of textile fabrics. Precision high-speed impeller for agitating the test specimens against cork lining for a pre-determined time controlled by a timer and audible alarm. Compressed air is also injected into the chamber to assist in the tumbling action. Laboratory standard compressed air supply required. High Tech Sample Chambers 1. Intelligent interface to guide the user. 2. Flexible system maximizes throughput and minimizes downtime. 3. Interchangeable impellers for different global standards. 4. Stable propeller and rotation speed. 5. Lights inside each sample chamber allow clear viewing of the test in progress 6. Controls are easily accessible for testing and illuminating the sample chambers 7. High quality motor provides lower running sound and longer service life. During operation, the Random pilling test chamber should be checked frequently. If the test is wrapped around the impeller, it does not turn over or is stuck at the bottom of the bin and remains stationary on the side. Close the air valve, shut off the airflow, stop the test, and remove the specimen. Unexpected shutdowns or other irregularities of the test are recorded. The above is the introduction of the random flipping pilling tester. If you have any other questions, you can contact GESTER and operate it under the guidance of the staff.

Temperature humidity chamber, also known as environmental test chamber or climatic chamber, is common environmental simulation systems and devices in laboratories and factories. Temperature Humidity Chamber for conditioning of samples prior to testing. It also can be used for a variety of materials of high - low temperature alternating test. The test temperature, humidity and time can be programmed. So Why Do We Need To Use Environmental Chamber Temperature And Humidity Test Chamber ? 1. Perfect simulation within a certain tolerance range,it can be simulated the external environmental conditions experienced by engineering products in the process of use, storage, transportation, etc. 2.trial and error The repeatability conditions provided by the environmental test chamber ensure that the test results obtained by the same product under the same test environmental conditions are comparable. An environmental test chamber may be used for multiple tests for the same type of product, and the same product being tested may also be tested in different environmental test chambers. 3.Controllable The environmental parameters can be adjusted freely, and the parameters are limited within a certain tolerance range to ensure the accuracy of the simulation. Avoid environmental conditions out of control resulting in product damage and unnecessary loss. 4.Safe Temperature And Humidity Chamber has the characteristics of safe operation, convenient operation, reliable use, long working life and so on. Various protection, alarm measures and safety chain devices are also set up inside the environmental test equipment. 5. Wide range of applications In detail, daily production and life, electronics, electrical, communication, instruments and vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace, sanitary products and other product quality testing require the use of temperature humidity chamber to help people produce and experiment. The temperature humidity chamber Environmental Chamber Temperature and Humidity Test Chamber can accurately simulate low temperature, high temperature, high temperature humidity, low temperature humidity and other complex natural environments, so as to detect the cold resistance, heat resistance, dry resistance and moisture resistance of products, and to improve the products to make them more durable.