Pen cap air flow tester mainly be used to test the safety of the caps for writing and marking instruments which are designed or clearly intended for use by children up to 14 years of age. However, Caps for writing and marking instruments which are not designed or intended for use by children, e.g. jewellery pens, expensive fountain pens, professional technical pens, are not be test by this method .

This tester applies to all types of baby walking frame, used to walking frame seating dynamic strength test.

Toys Flammability Tester GT-M17 is used to test children apparel or toy and its decorations flammability performance, to evaluate the burning speed and time of the following kinds of toys.

EN 71 Part 1 Length of Ropes and Chains Tester used to measure length for the ropes, chains or wires on toys

This Brake Test Machine is mainly used to test the motor brake performance of electric ride-on toys .

For this Brake Performance Tester, the tilt angle of the ramp is adjustable. The angle adjustment range is 0 ~ 45degree. Can be used to assist test the locking device of collapsible toys, the stability of toys, the brake performance of ride-on toys, etc., need to used with specified weight.

Test platform is made of a hardwood flooring pre-finished with polyurethane varnish material .it is used to prevention of falls down steps test and tip over test for baby walking frame.

Children bed comprehensive tester is mainly used for crib comprehensive performance test.

Ball Impact Tester is used to test the impact resistance of all rigid toys that cover the face, meets standards: ASTM F 963, ISO 8124-1, GB6675-2.

Electric Pencil Hardness Tester GT-H100 Product Introduction Application: The hardness pencil scratch the surface of the coating film to test the surface hardness of the coating film layer, hardness pencil fixed at an angle of 45º, so that the front end of the pencil center and the surface of the coating film layer in contact with the appropriate load, according to a certain speed (JIS standard 0.5mm / s) to move the test platform so that the surface of the coating film layer moving through the pencil center, the coating film layer will not cause damage (scratch) the softest pencil grade can be considered as the coating film Layer hardness. Principle The hardness pencil scratch the surface of the coating film to test the surface hardness of the coating film layer, hardness pencil fixed at an angle of 45º, so that the front end of the pencil center and the surface of the coating film layer in contact with the appropriate load, according to a certain speed (JIS standard 0.5mm / s) to move the test platform so that the surface of the coating film layer moving through the pencil center, the coating film layer will not cause damage (scratch) the softest pencil grade can be considered as the coating film Layer hardness. Key Specifications Model GT-H100 Testing Angle 45 degrees Load Adjustable, 500g, 250g Movement Speed 5mm/sec, adjustable Stroke Space 40mm Table Approx. 12x17cm, can fix the sample Power Supply 220V / 50Hz Accessories Standard Accessories 13pcs Standard Pencils Standard Accessories 1Set Weights roducVideo 

For this Inclined Platform Tester, the tilt angle of the ramp is adjustable. The angle adjustment range is 0 ~ 45degree.

Dry Cleaning Cylinder used to determine color fastness to dry-cleaning and chlorinated pool water, besides, to prepare samples for flammability testing. Meshed with various types of combustion tester, Use tetrachlorethylene to wash the surface flame retardants.