EN 14988 High Chair Comprehensive Testing Equipment GT-MJ01 Product Introduction Application: This tester is used for testing the mechanical properties of high chair. Can perform the horizontal static load and vertical static load and static load on backrest. The High Chair Comprehensive Testing Equipment is equipped with two drive units, and can be individually controlled to repeatedly load the test points . Through different parameter settings, the machine can complete the following types of test functions on the high chair: 1. Seat,tray and back and footrest static load test. 2. Horizontal outward static loading test for front part of the high chair 3. Strength components of the restraint system and belt attachment point test 4. High chair stability test Standards: EN 14988-2017 Section 8.8.6.2, 8.8.6.3, 8.9.3.2.2, 8.11.2.2, 8.12.2.3, 8.12.2.4, 8.12.2.5, 8.12.2.6 Feature 1. The main structure of the machine is made of aluminum, beautiful and easy to maintain. 2. Servo motor drive, test loading control is more accurate, and the noise is even smaller. 3. High Chair Comprehensive Testing Equipment PLC touch screen control makes the operation more convenient. 4. In addition, the machine loading device using electric control movements, more extensive test space.   Key Specification   Model GT-MJ01 Vertical load capacity 1000N Horizontal load capacity     1000N Testing time 0-99999 (can be adjustment) Control method PLC touch screen control Lifting Method Automatic lifting Power 1 phase AC 220V 50/60Hz Dimension (W×D×H) 180×250×200cm Weight 900kg Accessories: Standard Accessories   2pcs GT-LB01-5 local loading pad 4pcs Stops   2pcs Stationary fixture  Optional Accessories 1pc GT-MJ23-1 test beam 1pc GT-MJ27 test loading

The High Chair testing machine is specially designed for testing the impact strength of backrest and handrail.

High Chair Seating Impact Testing Equipment GT-MJ31 Product Introduction Application: This tester applies to all types of high chairs, with 2 functions of chair seating impact and seating durability test. The purpose of this test is to evaluate the ability of the chair to withstand heavy and abusive impact forces on the seat and evaluate the ability of chairs to withstand fatigue stresses and wear caused by downward vertical force(s) on the seat. Standards: EN14988-2017 Section 5.17, 8.8.5 Feature 1.The main structure of the machine is made of aluminum, beautiful and easy to maintain. 2. Using PLC touch screen control, operation more convenient. 3. In addition, the machine loading device using electric control movements, more extensive test space.   Key Specification   Model GT-MJ31 Impactor Diameter 150mm Impactor Weight 23kg Cylinder Stroke 0~300mm Beam Stroke 900~1350mm Test Speed 10~30r/min Test Times 0~999999times, settable Control PLC touch screen control Dimensions(W×D×H) 150×150×200cm Weight ≈300Kg Air Source ≧7kgf/cm^2 stable air source Power 1∮ AC 220V 50Hz 5A   Accessories: 23kg Impactor    1pc