Baby Trolley Handle Durability Tester GT-MH25

Baby Stroller Testing Machine Rotating Test GT-MH22 Product Introduction Application: The tester can attach the vehicle by its wheels or axles to the rigid platform which can be orientated in an axis parallel to the ground. Slowly rotate the vehicle with the test mass through a specified angle to the horizontal both in a clockwise and anticlockwise direction such that the attachment devices alone transmit the test load to the chassis or seat unit , and maintain this position for an specified time in each direction. Satndards: EN 1888-2012 Section8.1.3.2.1 ,8.10.2, GB 14748-2006 Section 5.15 Feature 1.The test platform with wheel axle fixing device. 2.The test platform can rotate clockwise and counter clockwise. 3.Automatic judgment of specimen damage, automatic stop working. 4.Programmable control rotation angle, test frequency, cycle test, spacing interval 5.Can autosave when interruption of power supply, can choose to stop or continue to work 6.High precision angle sensor, can display table angle in real time. Key Specifications   Rotating speed 4±0.5rpm Control mode PLC Display mode 7 inch screen touch screen display Date display Angle, frequency Power supply AC 220V, 50Hz

The machine is mainly used to test the dynamic durability of the baby trolley on irregular surfaces.

This machine is to test the dynamic resistance of reversible and/or adjustable child vehicle handles.

Back loading pad, which is a rigid rectangular object 200 mm high and 250 mm wide, the loading surface of which is curved across the width of the pad with a convex cylindrical curvature of 450 mm radius and with a 12 mm radius on all front edges.  

Mattress Roller Tester is used to determine the mattress endurance for long-term repetitive loading.

Impact Penetration Tester is especially suitable for measuring the penetration resistance of garment fabrics.

Safety Tester Diameter Rod Used to determine whether the openings or pores on the children bed will cause children finger fall into or not. This kit contains a 5.33mm diameter rod and a 9.53mm diameter rod.

This load pad is designed specifically for BIFMA X5.1, which is a rigid circular object 203±13 mm in diameter,with a 12 mm front edge radius.