Rubber Testing Equipment Manufacturers Suppliers, Factory direct sale

Rubber Testing Equipment Manufacturers Suppliers

Rubber Testing Equipment Manufacturers Suppliers, Factory direct sale

Height Gauge GT-KB30 Product Introduction Application: The height gauge consisting of A.A flat plate with a clamping ring meeting the requirements and filled on its lower surface. B.A hole through the plate which is at the centre of the clamping ring and of diameter less than the clamping ring but large enough to allow the spindle of the thickness gauge to move freely within it. C.A thickness gauge which. has a spindle with a spherical lower surface of radius 1.5 ± 0.2 mm; applies a force of 0.55 ± 0.10 N to the spindle; is capable of measuring to the nearest 0.05 mm; and is mounted so that the spindle passes vertically through the hole in the flat plate. Key Specifications Model GT-KB30 Material Steel Dimensions（W×D×H） About 150 ´ 150 ´ 200 mm Weight About 10kg Standards IS 7554-2009 Annex A-1.14, 1.15;  IS 15844-1-2023 Section 4.10

Snap Button Tester is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable.

Sliver and Roving Length Meter is used for making cotton, wool and spun silk yarn into sliver and roving with a certain length in order to measure its evenness.

This is a fixture which hold the chair in position while applying the horizontal force and lowering the CMD into the chair.

Mouth-actuated Tester is suitable for Toy Durability test Toy safe Durability test, such as whistles with a ball, the sounders with a reed and other toys.